Description
Engineered Curve. Edgeless Lens. Hooded Dark Reflectors. Built with latest technology. The result is a sleek looking bar with high output, improved beam control and less glare. 400W / 33,600lm Raw – 16,261lm Effective Part ID: NJCR40EM Length: 40″ Beam: Combo Lumens: 33,600lm Raw / 16,261lm Effective Colour Temperature: 5,700K – Daylight Watts: 400W Amp. Draw: 13.5A Voltage Range: 10-30V DC IP Rating: IP67 – Waterproof to 1m Certification Standard: ECE-EMARK Certification Test: ECE R112 (Auxiliary High Beam Driving Light) LEDS: 80 Chip Type: 5W OSRAM ECE/EMARK R112 Certified For Maximum Street Legal Performance This bar was built using latest advancements in technology, such as edgeless lens and hooded dark reflectors. The hooded reflectors reduce glare and allow for better beam control. The edgeless design makes it hard for snow and ice to stick to its lens while also reducing wind friction and driving noise. The engineered curve spreads the light wider and adds to the curb appeal. Each light bar is clearly marked to allow law enforcement and vehicle inspectors easy identification for compliance. Light bar comes with complete wiring harness, dual mounting system and hardware. Please note that there are currently No Covers available for this bar. *Always check with regional rules and regulations regarding the use of auxiliary driving lights. NightRider™ LEDS strives to deliver the safest and most lawful lights, but cannot be held accountable for regional restrictions, improper mounting, aiming, or wiring.
